Dealing with a Sudden Hot Water System Failure: Essential Actions
Dealing with a Sudden Hot Water System Failure: Essential Actions
Blog Article
We have come across this article on What Would Cause My Electric Water Heater to Stop Working? below on the web and figured it made perfect sense to share it with you over here.
Numerous contemporary houses use an electrical water heater for their furnace, due to its convenience and convenience of use. Nevertheless, just like any other electric devices, issues might develop with its usage, all of a sudden. It can be truly frustrating to get up to a cold shower instead of a hot one or having your bath with water that isn't warm sufficient or perhaps also hot. Whatever the instance may be, hot water heater troubles can be rather aggravating. Luckily, we have actually made a list of possible options to your hot water heater issues. There are a number of aspects that can create a lot of these issues, maybe a problem with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you turn off the main power supply for safety. Whatever the problem is, getting it repaired should not pose too much of a concern if you adhere to these steps:
Check Your Power Supply:
As basic as this might seem, it is very necessary. Without ample power, your hot water heater will not function. So the first thing to do when your water suddenly stops working is to confirm that it isn't a power trouble. Check if the fuse is burnt out or the breaker tripped. If the breaker is the problem, simply transform it on and off once again. Change any damaged or worn-out fuse. Check the appliance with power after these adjustments to see if it's currently functioning.
Check the Heating Element in the Hot Water Heater:
If it's not a power issue, then attempt looking into your burner if it is still working. Examine each of your burner to ensure the trouble isn't with any of them. If any of them is malfunctioning, change that component and afterwards examine whether the warm water is back on.
Examine Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm enough, you may need to check the temperature level setups on your top thermostat. Ensure the breaker is turned off prior to doing anything. Open up the accessibility panel as well as press the red button for temperature reset over the thermostat. This must help heat the water. Turn the breaker back on and check if the trouble has been dealt with.
Call A Specialist:
If after replacing all faulty components and resetting your temperature, the hot water heater still isn't working, you might need to call an expert plumber for an expert point of view. The problem with your heating unit could be that the cold and hot taps have been changed or it may be undersized for the quantity of warm water required in your home. Whatever the instance might be, a specialist plumber would certainly assist fix the problem.
Verdict
Water heater issues are not always major. A number of them result from minor problems like a blown fuse or damaged burner. Changing the damaged components must work. Nevertheless, if you are still not able to resolve the problem, give a call to your nearest plumber ahead to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We were brought to that write-up on No Hot Water — Water Heater Repair from an associate on a different web property. If you please take the time to share this blog post if you enjoyed reading it. Thanks for your time. Come back soon.
Premium service for plumbing emergencies. Report this page